While operating the HP printer, many of the users might have seen the error code oxc4eb823f splashing on its screen. So, what is HP Printer error code oxc4eb823f? Why do the users get it? And how to fix it? Keep in touch with us to understand the problem behind this and ways to rectify this. We are here to provide you with the answers to all your technical questions.
How to solve the HP printer error code oxc4eb823f?
Here are some steps to rectify this issue. You just need to the hard reset:
⦁ Switch on your HP printer and wait for it to get silent, idle and all set to be continued to use.
⦁ Now, disconnect the power cord from the rear of your printer.
⦁ Also, make sure to unplug the power cord which is on the wall outlet, and then wait 60-70 seconds.
⦁ Now, plug back the power cord on the outlet of the wall, and also reconnect the power cord to the rear of your printer.
⦁ The last step is to finally turn on your printer if it does not turn on automatically (Otherwise it must turn on automatically because while disconnecting the power cords initially you did not switch off the printer of course!).
Then your printer will go to a warm-up period. Wait for it to settle and become idle and silent to be used. Thus, this might solve your problem.
Users have also reported other errors in the HP printers, such as HP printer error code oxc4eb827f and HP printer error code 0x83c000a. Thus, there are slightly different ways of rectifying these various errors on your HP printer device. But, if you may ask “Why does my HP Printer say error code?”, the answer might be that your printer is not turned on and also not connected to your PC by cable or Wi-Fi accurately. Also, you could also check the papers on the printer and even the ink just to make sure that none of the paper is jammed and the ink is still present in enough quantity to print the required pages. So, the only basic thing that you are required to do is to reset your printer.
How to reset your printer?
⦁ You will have to completely remove all the power cables of your printer.
⦁ Then simultaneously hold the ‘Menu’, ‘Go’, and ‘Select’ buttons.
⦁ While holding these buttons, switch on the power of your printer.
⦁ This way, “Restoring Factory Defaults” will appear on your screen. At this time, release all the buttons.
⦁ Finally, allow the printer to warm up and settle before you use it again.
Thus, by following such basic steps you can undo these certain and frequent errors that are displayed on your HP Printer device. Hope this article helped you understand the logic and methods behind the errors. If the problem still arises, then you can contact our experts who will resolve this Error instantly. Dial HP Printer Customer Support +1-888-479-5919 for Best and instant assistance.