The HP Printers are widely used by users today as these are considered most reliable and convenient to use. These are very user friendly as well. But it happens at times that the Printer shows an error in its display that interrupts the normal working of it.
There are many errors, but HP Printer Error Code 0x610000f6 is the most reported error by HP users. so let’s check it out what is error code 0x610000f6 and how to fix it.
What is HP Printer Error Code 0x610000f6?
The HP Printer Error Code 0x610000f6 is one of the most common errors in the HP Printer which is displayed on the control panel of your PC, and hence, the content/product is ultimately not printed.
How to Fix HP Printer Error Code 0x610000f6?
There are various ways or solutions that we have mentioned here, by following which you can overcome this error problem and your printing will continue again. You can try and chose these solutions, thus implementing them one by one, but make sure to follow them in the order just as they are mentioned below.
Solutions to fix HP Printer Error Code 0x610000f6
Solution 1: Turning off and off the printer again
Step 1: Switch off the power button of your printer and remove all the plugs as well. Wait for 1-2 minutes.
Step 2: Again switch on the printer.
Step 3: If this resolves the issue, it’s good! If still the problem persists, move on to the next solution.
Solution 2: Clear the jammed paper
Step 1: Jammed papers can be the reason to cause the carriage to stall. So, remove all the loose papers (if any).
Step 2: Once done with this, turn off the power button and also remove the plug from the socket.
Step 3: Push the buttons on either side of the rear access panel and then pull the panel away from the product.
Step 4: Gently pull out all the papers from the roller, thus again reattaching the rear access panel, reconnected the plug to the socket, and switching on the power button. These additional steps were basically to get the solution for the problem anyhow.
Step 5: But, if the problem still exists, move on to the next step.
Solution 3: Clear the paper jam by opening the top cover of the printer
Step 1: Again, switch off the power button and remove the plug.
Step 2: Open the top cover, that is the cartridge access door and move the carriage at one side of the printer, manually.
Step 4: If you see jammed papers, gently remove them from the top of the printer itself and then again close the cartridge access door, plugin again, and finally switch on the power button of your printer.
Step 5: Try printing any product again, and if the problem of the error code is again displayed on the screen, then move on to the next step.
Solution 4: Make sure that the free movement of the carriage is allowed
Step 1: Again, switch off the power button and remove the USB cable from the back of the printer.
Step 2: Open the cartridge access door again and press on the carriage latch handle tightly so that it is completely closed.
Step 3: Now, you have to check if the carriage moves freely from one side to the other side. Also, make sure to remove any obstructions or debris in the path of the carriage.
Step 4: Once this is done, close the cartridge access door and restart your printer completely step by step.
Step 5: If still your problem is not solved, then move to the next solution step.
Solution 5: Remove and Reinstall the Cartridges
Step 1: turn on the printer and open the cartridge access door.
Step 2: Press the tab on each cartridge and then remove each of them from their respective slots.
Step 3: Once the removal of the cartridges has been completed, now is the time to reinstall them. So, slide each cartridge into their respective (now) empty slots until they all are firmly seated at their places. The insertion should be accurate.
Step 4: Once the reinstallation is also done, close the cartridge access door and again restart your printer entirely, after a time of 60 seconds.
Step 5: If still the error is being displayed, then move on to the next solution to fix the error.
Solution 6: Plug the printer into a wall outlet, directly
Steps 1: Disconnect the power plug from the back of the printer or from any surge suppressors.
Step 2: Plug it directly into a wall outlet again.
Step 3: Reconnect the power cord to the back of the product again and then switch the product on.
Step 4: Try printing again. If the problem still exists, then move to the next solution.
Solution 7: Reset the printer and then again print a status report
Step 1: Turn off the product completely, by disconnecting the USB cable from the back as well.
Step 2: Disconnect the power cord also, and then wait for like 60 seconds.
Step 3: Also, unplug the cord from the wall outlet, and then plug it back again.
Step 4: Again reconnect the power cord to the back of the product, thus again pressing the power button to turn the product on.
Step 5: Reconnect the USB cable also and now load the plain white papers into the tray of the printer.
Step 6: Then go to the control panel option and over there you will find a right arrow button. Click on it to view more options.
Step 7: Go to Setup->Tools->Printer Status Report.
Step 8: This prints the status report of your printer/product.
Step 9: If still the problem persists, then go to the last solution available below.
Dial HP Printer Customer Support Number
Well, If you are not able to fix HP Printer Error Code 0x610000f6 by the following solution then no need to worry about it. You can Dial HP Printer Customer Support Number to get in touch with Professional Certified Experts, who will resolve your issue within no time.