Are you facing trouble while working with the normal printing with your Epson printer? Is your printer showing an error code 0xe5? You have landed on the correct page. This article has been written for all those users who are facing this issue of Epson printer error code 0xe5, as here we have mentioned the ways by which one can resolve this issue by following a few simple steps.
Epson printer is one of the highly demanded printers these days in the market because of its versatile usage and superb features. EVery new model launched by the company brings in an entirely different feature in the printer, that attracts the customers even more. That is why, be it for professional use or personal use, Epson printers are considered by many users nowadays!
But, since it is also a machine, so it can have issues that might hinder its normal functioning. One such issue is the Epson printer error code 0xe5 that has been faced by many users. So, continue reading this article until the end and get to know the exact steps on how to solve this issue without going to the Epson showroom.
Causes behind the Epson printer error code 0xe5
There can be multiple reasons as to why this error occurs in your printer. Here we mention a few of them which can be relatable with your printing device as well.
- The printer and your PC or laptop, for instance, are not connected properly.
- There can be a problem with a paper jam, that can cause trouble while printing.
- This can also pop up due to any malware present within your PC, that disrupts the software of your system.
- There can also be a case that the printer carriage (of your printer) has been overloaded.
- This error can also come because of any failure in your system, for example, CR encoder failure, or Motor driver failure.
- This can also occur when your PC fails to recognize your printer (if you have a wireless printer that is physically not connected with your PC with any wire or USB).
- Also, there can be an issue with the blue stripe of the tape which is present I side the printer and used to hold the cartridge carrier.
Different Method To Fix Epson printer error code 0xe5
Reset the printer again – This is required because the Epson printer error code 0xe5 is caused when your PC or laptop is unable to recognize your printer. So, you need to make sure by reconnecting your printer to your PC again that it recognizes it. This will remove this error code. But if your error code is still not removed, then there is a problem within your printer itself. So, for that, you need to check out other methods mentioned below.
Do the complete scanning – As mentioned in the reasons behind Epson printer error code 0xe5 above, this can also occur due to the presence of any malware in your infected files in your computer, unknowingly. So, you need to work on the entire scanning of your system. Once the scanning is done, shut down your computer and disconnect it completely by removing the wires attached to the plug. This is called the basic troubleshooting procedure. Reconnect the wires and turn your computer on after a few minutes. This might solve the issue. Check-in for the error code once again. If it still appears, then go to the next methods.
Open up your printing device and check the cartridges – This method involves opening the printhead of your printer, and open the cartridge lid to check the ink level in them. If you find them low, then you will have to refill them. If even after refilling the cartridges you are still facing the error, then it might be the case that your cartridges are incompatible with your printer. So, you are left with no other option but to replace them anyhow! Even after replacing them, you are seeing this error, then go on to the next methods.
Instant Help by Epson Printer Customer Support
If none of the above-mentioned methods assisted you in fixing the error, then you can contact Epson Printer Customer support Number +1((866) 584-0601. our experts are available 27×7 for your assistance.
